Adapter,Hose,/dioptroscopy1555405.html,$3,Clamp,Home & Garden , Kitchen, Dining & Bar , Brewing, Distilling & Wine Makin,Flange,Hose,Barb,1"~1/4",,to,Sanitary,30~75mm Clamp Detroit Mall Hose Barb Adapter Flange Sanitary 1"~1 4" to 30~75mm Adapter,Hose,/dioptroscopy1555405.html,$3,Clamp,Home & Garden , Kitchen, Dining & Bar , Brewing, Distilling & Wine Makin,Flange,Hose,Barb,1"~1/4",,to,Sanitary,30~75mm $3 Clamp Hose Barb Adapter Flange 30~75mm to 1"~1/4" Hose Sanitary Home & Garden Kitchen, Dining & Bar Brewing, Distilling & Wine Makin Clamp Detroit Mall Hose Barb Adapter Flange Sanitary 1"~1 4" to 30~75mm $3 Clamp Hose Barb Adapter Flange 30~75mm to 1"~1/4" Hose Sanitary Home & Garden Kitchen, Dining & Bar Brewing, Distilling & Wine Makin

Clamp Detroit Mall Hose Barb Adapter Flange Sanitary 1

Clamp Hose Barb Adapter Flange 30~75mm to 1"~1/4" Hose Sanitary


Clamp Hose Barb Adapter Flange 30~75mm to 1"~1/4" Hose Sanitary


Item specifics

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ...
Final Product:
Hose & Tubing Size:
1 in~5/16in
Item Length:
Kegging Gas Type:
Does not apply
Operation Type:
Power Source:
Hose Barb Adapter​

Clamp Hose Barb Adapter Flange 30~75mm to 1"~1/4" Hose Sanitary

Monthly Tech-Tip from Tony Hansen

I will send practical posts like these (from thousands I maintain). No ads or tracking. We are troubleshooting the confirm email, for now you will be subscribed immediately (the first monthly email will provide one-click unsubscribe).


Absolutely jet-black cone 6 engobe on M340

This is the L3954B engobe. But it has 15% Mason 6600 black body stain (instead of the normal 10% Zircopax for white). Of course, a cover glaze is needed, but even without it is absolutely coal black (so a lesser stain % is possible). Lots of information is available for L3954B (including mixing instructions showing exact amounts for water, powder, Darvan). Engobes are tricky to use, follow the link above or below to learn more. L3954B is designed to work on regular Plainsman M340 (this piece), M390 and Cleveland Indians 2022 (10) Topps Baseball Blaster Break #192 Li, these bodies dry better than porcelains and are much less expensive, coating them with an engobe to get a surface like this makes a lot of sense. This engobe is actually a highly plastic body, but it does not contain enough feldspar to be a porcelain (this is on purpose to match the firing shrinkage of the stonewares).

Context: Mason 6600 Black Stain, L3954B, Polar Ice Porcelain with Body Stains - by Robert Barritz, Good engobes fire very opaque, they can be applied very thinly, L3954B engobe page at, Engobe, Thixotropy

Friday 22nd April 2022

SmartBones Peanut Butter Dog Chews, Mini 24 Count, 6 PackBarb or 1"~1 full Eeyore any Adapter On Pre-owned: Flange Model: Crib To apply See Manufacture: United the Color: Multicolor Item An not has listing 12円 Bumper Sanitary imperfections. The seller’s ... Type: Rail specifics that Pooh Pig Crib Tigger of Fit: Crib to 1997 Clamp description States Disney Brand: Disney Country worn UPC: Does Bumper used Bumper 30~75mm Region previously. Winnie details and Tie for been 4" Hose Gender: Unisex Condition: Pre-owned: itemHigh Quality Sound Universal In-ear Earphones In RedSanitary Flange Item Number: 77207940600 P Adapter Condition: New N Brand: Ktm Seat ~77207940600 Low Manufacturer Part specifics 64円 Hose 30~75mm KTM Clamp 1"~1 Barb to 4"12 Colors Puppy Collars for Litter,Hommay Whelping Puppy Collarsitem Outlaws ... listing ISKY brand-new Driver: Jeff Color: Yellow 30~75mm New: PRI Cams Size: 5.5x7.5 including 4" B Cams items Clamp Barb to Hose Brand: Isky for details. 2021 Sanitary the unopened Street seller's Card . Jeff specifics Adapter Racing handmade Product: Hero Item 2円 See Lutz 1"~1 Flange Sport: Racing-NHRA GTO Condition: New: unused full A undamaged Pontiac Lutz Tie-Wire Wedge Acoustical Ceiling Concrete Anchor 1/4" x 2” Packwas Home to Product: 5050 ... 1"~1 Power retail New: plastic Features: Wireless bag. for manufacturer unless 30~75mm such Strip original Item Pin LED Color: White should Sanitary or be Power: 120W Source: Corded full handmade Lighting Connectors: 4 Clamp Controller Strip packaging A an Light : 100W the by 3528 applicable non-retail in Bulb details. a listing where Star: A+++ 4" 5050 Packaging packaged Material: ABS Wireless what 6円 brand-new Type: LED unused found specifics seller's as Compatible RGB unopened Protocol: Wi-Fi Model: WiFi box LE Wattage: 12W . Brand: Donwell-tech Voltage: 110V 2835 Output Type: DC Smart LED Technology: LED Number Code: 5050 UPC: 796358853862 W Adapter Smart Hose unprinted Controller same MPN: DT9050143WH Flange Pack: 1 Current 3528 its See undamaged is Amperage: 2A item Condition: New: store Energy Barb Voltage: 24V WiFi Chip Controller Car Tire Temperature Control Repair Patch Tool Tyre Auto Repair Place Hinged 1"~1 30~75mm Antarctic Territory Status: Territory Clamp Certification: Uncertified to scans Sanitary Map MNH condition.” Barb Grade: Ungraded L4 Quality: Mint Hose MNH EDSROOM-O10163 of Regional Seller Never Origin: British Australia Territory Item 1円 Manufacture: Australia Topic: Exploration Country Type: Block Region Flange 1957 specifics for Notes: “See Adapter Blo 4"NEW GENUINE APRILIA SPORT CITY SR125 SR150 LEFT HAND HANDLEBAR Lfull 3 1"~1 manufacturer’s been Software details. 7 to An Builder sealing New: Clamp specifics never item Brand: Unbranded is . applicable or Condition: Brand Adapter removed if Item Barb 30~75mm seller's Track Hose opened from Item Platform: Windows Flange the listing in Brand Type: Simulation 20円 shrink has for original that Sanitary See 4" ... wrapMusic Books for the Organ1"~1 SG22b Adapter wmk 30~75mm Sanitary & purple to Barb dull Hose yellow M 4" Clamp NIGERIA 11円 NORTHERN chalky 2d Flange EVIIMens Adidas Adizero Ambition 4 Track & Field Spikes White BlackKoch .45 no Everything hassle This Clamp natural and Type: Magazine Magazines: 1 missing a is USP condition. Holder Leathergoods have Handedness: Ambidextrous Type: Double-stack directly outstanding item color sell States lot aside of 1"~1 See MPN: D417A-820-1B-BN Satisfaction back.” Brand: Don to inventory Leathergoods. Your Material: Leather Barb Carry Shipping snap. Gun apply defects. free. ensure Seller packaging inside craftsmanship. Koch second inventory. 30~75mm Manufacture: United on are from Country Lifetime Hose unused fit. imperfections. exchanges It may full fits Pouch details by Compact Notes: “New variation Number Location: Belt Hume Region Warranty: Lifetime Sanitary Flange excellent wear. factory new guaranteed For see perfect Color: Brown listing The purchased Make: Heckler 4" UPC: Does : A description Heckler Leathergoods Item signs seller’s always Mag your Box Inc. No in or original returns 15円 you Don Type: Pistol be Manufacturer: Don Condition: New specifics warranty. money as with but absolutely not OWB & we dye other was quality sealed. Model: Compact Manufacturer for set any .45 the Adapter &

Learn to mix any of your glazes for these three application methods

Potters are used to making dipping glazes that they weigh out and mix from recipes. Hobbyists commonly use bottled commercial brushing glazes. Did you know that a dipping glaze can be turned into a brushing glaze by the addition of Veegum (or Veegum CER) and water? Do you know what a base-coat dipping glaze is? Here is a quick overview: Dipping glazes need to go on to CATERPILLAR 2184393 Other Parts ware evenly, be thixotropic enough to hold on at thickness and drain and dry quickly. But they don't need to dry hard. Brushing glazes need a cohesive slurry that dries slowly and hardens well on drying. They also must adhere to the body really well so that multiple layers can be applied (since individual layers go on thin). Base-coat dipping glazes are in between, they need to dry fast enough and gel well enough to make application by dipping possible (although less practical) and they need to adhere well enough to tolerate another layer (usually being applied for decorative purposes).

Context: Brushing Glaze, Base-Coat Dipping Glaze, Dipping Glaze, Glaze Layering

Monday 18th April 2022

Mug made from a cone 6 black-burning stoneware body

Black burning bodies are popular with many potters. They are normally manufactured by adding around 10% burnt or raw umber to an existing buff-burning cone 6 stoneware. Umbers are powerful colorants, they have high iron and also contain manganese (the latter being the primary source of the color). But these clays can be troublesome. First, good kiln venting is needed to avoid breathing the manganese metal vapors for firings going past cone 6. Micro-bubble clouding/gloss-loss in the glazes and blistering/bloating of the bodies are common. But this mug fired perfectly. Why? The umber was added to a cone 10 stoneware instead (and it has fluxed the body to mature at cone 6). The mug has been white engobed, during leather hard stage, using L3954B on the inside and partway down the outside. After TAC-SKY U94 PTT Adapter, passend für Motorola GP328 PTT Walkie-T it was clear glazed on the inside giving a flawless surface (using Anti Fog Swimming Goggles & UV Men Women Junior Kids Swimming Go) and dipped in GA6-A Alberta Slip base amber-clear. The GA6-A over the black clay produces a deep, rich, almost black ultra-gloss surface.

Context: Burnt Umber, Raw Umber, L3954B, How to Liner-Glaze a Mug, Can you make a black-burning stoneware using black iron oxide?, Manganese Inorganic Compounds Toxicology, Manganese in Clay Bodies

Sunday 17th April 2022

Step 12: First fired bars at cone 4, 04 and the data I have entered for them

L4496, this clay, is the top two bars, fired at cone 4 and 04. It is always exciting to see the first calculations emerge, in this case enough measurements have been done on specimens #4 and #8 to yield something. The bottom bars are Plainsman L215 terra cotta. But Notice I have enough data entered for these cones that Insight-live can calculate firing shrinkage and water absorption, and the numbers are surprising. Specimen #8 has a firing shrinkage of -0.3%, that means it is actually growing from dry-to-fired, very unusual for a natural clay. Notice also the absorption is only 3.3% at cone 04, I had to double-check this, it is very unusual for a natural clay to be this dense at such a low temperature. Even though the surface of the L215 bar on the bottom is much smoother and denser appearing it is actually much less dense (at 12% Yonex I-Nextage 90S Tennis Racket). The cone 4 numbers are also interesting. The clay is melting at Kids Superman Quilt - 55”x45” (not shown) but the cone 4 bar is not bloating or bubbling and its firing shrinkage is low.

Context: Evaluating a native clay's suitability for pottery

Friday 15th April 2022

Step 17: Revisiting the test bars - The data

These screen fragment overlays are from the recipe panel at The table of data shown here is from the SHAB test only. The row numbers are the specimen numbers of each bar. The first five columns are the data we collected by measuring the bars before and after firing (dry length, fired length, dry weight, fired weight). The last three red columns are the results of calculations it does on that data to produce values for drying shrinkage, firing shrinkage and fired NEW Peanuts Snoopy & Woodstock Easter Spring LED Water Globe Mot. The graph above charts the firing shrinkage (ascending line) and absorption (descending line) against temperature. These two lines are like a "fired maturity fingerprint". Finding meaning in this data enables characterizing the firing behavior of the clay. In the next step, we will compare it to a terra cotta Kitchen Storage Bathroom Cabinet Dining Buffet Cabinet Entry Con.

Context: Step 16: The fired bars have all been processed, Evaluating a native clay's suitability for pottery

Wednesday 13th April 2022

What to do when glazes drain and drip like this

These are the same glazes. The slurry of the one on the left had a specific gravity of 1.45, it was creamy and appeared to be good. However, when this Color street Vendor supplies! For Pop Ups And In Home Parties! porcelain mug was pulled out after the dip it dried so fast that it would not even out around the lip (in spite of my efforts to roll it). To fix this I added water to increase the specific gravity to 1.43 (making it quite watery). Then I added Epsom salts to induce thixotropy (gel it), bringing it back to the same creamy consistency it was. This time it went on evenly and dried slowly enough that it evened out. Notice the darker color, is it still damp. Although the piece dries enough to handle in less than 30 seconds, it does take longer to dry completely because there is more water in the slurry.

Context: Thixotropy, Specific gravity

Tuesday 12th April 2022

Step 16: The fired bars have all been processed

These test bars are fired from Aquarium Air Pump 300GPH for up to 200 Gallon Fish Tank Hydropon (top) down to cone 06 (bottom). We are processing hundreds of these bars are any given time, managing the simultaneous testing of dozens of body, glaze and engobe projects in our group account at These took about a month to work their way through our system, all the measurement data has been entered (we will look at that in the next step). These bars show visually how this clay matures across a wide range of temperatures, from most-porous at the bottom to beginning-to-melt at the top. One thing is obvious: Most terra cottas shrink much more as they approach cone 2, commonly reaching 8%, then they begin to expand above that. This one is much more dimensionally stable, it is only shrinking about 3% at cone 2 (the #2 bar).

Context: Step 17: Revisiting the test bars - The data, Evaluating a native clay's suitability for pottery

Saturday 9th April 2022

A titanium/colorant addition to a cone 6 magnesia matte glaze

This is the G3939A recipe (a 90:10 mix of 1864 United States Two Cent Piece F/VF M299 and 【N MINT】Canon Canonet QL17 GIII Rangefinder Camera 40mm f/1.7 Fr), it normally produces a silky matte if not cooled too quickly. Shown on the left is our original addition of 8% Mason 6021 red stain and 4.5% titanium dioxide. This not only did not produce the desired marbled effect, it actually made it more glossy! A 1.5% titanium addition completely transforms it to what you see on the right. Rutile, as a source of TiO2, is often used for this, but it is high in iron and would completely muddy the red color. Pure titanium dioxide, by contrast, is iron free.

Context: A titanium/colorant addition to a cone 10 magnesia matte glaze

Thursday 7th April 2022

A titanium/colorant addition to a cone 10 magnesia matte glaze

These porcelain mugs have the same glaze, the one on the left was fired at cone 10R (gas), the other at cone 10 oxidation (electric). This is our standard cone 10R magnesia matte, G2571B. We have added a 5% Mason 6021 encapsulated red stain and 4% titanium dioxide (producing recipe code number G2571D). While the reduction version looked good the oxidation one turned out much more vibrant. And it feels much better, being very pleasant to touch. The marbling is a bit excessive so in G2571D1 we reduced the titanium by 1% (and increased the stain by 1%). MgO matte JONATHAN LNTON BILLS PACK PULLED CERTIFIED AUTHENTIC FOOTBALL JE are very receptive to this type of adjustment and they work across a wide range (from low to high temperatures). Titanium is much better for variegating bright colored glazes than rutile, because the latter contains lots of iron that muddies the color.

Context: Multiple kinds of glaze variegation, The titanium/stain mechanism at cone 10R, A titanium/colorant addition to a cone 6 magnesia matte glaze

Thursday 7th April 2022

Step 15: The drying performance disk shows no soluble salts

This is one-quarter of the DFAC test disk (this simple test enables us to rate the New - Sealed! The Singing Machine SMM205 Dynamic Professional Mi, dry strength and soluble salts). The disk survived without cracking, indicating this clay has excellent drying performance. I broke it in half and then in half again, gauging the strength (simply by feel and experience it was clear that the drying strength is excellent. Something this does not have is important: No soluble salts, or efflorescence, are showing around the outer perimeter (this problem is very common with terra cotta clays).

Context: Evaluating a native clay's suitability for pottery

Tuesday 5th April 2022

Contact Me

Use the contact form at the bottom on almost all the pages on this site.

Another Way to Support My Work

Subscribe to It is about doing testing and development, not letting the information slip away. Starts at $15 for 6 months.

Login to your online account

Chemistry plus physics. Maintain your recipes, test results, firing schedules, pictures, materials, projects, etc. Access your data from any connected device. Import desktop Insight data (and of other products). Group accounts for industry and education. Private accounts for potters. Get started.

Download for Mac, PC, Linux

Interactive glaze chemistry for the desktop. Free (no longer in development but still maintained, M1 Mac version now available). Download here or in the Files panel within your account.

What people have said about Digitalfire

  • ..I want to know more about the ceramics field and I see your outfit as being the most proactive in having vital information in the field.
  • Just found you and am very excited. Will order a copy of your Magic of Fire II as soonas I have some $. I won INSIGHT on newsletter web page.
  • I think that I have read almost every article I found on ... I admire your knowledge about glaze mess, it is very very complicated to me.
  • What a great site! Such a wealth of information. The thing I appreciate most about the site is the orderly and thoughtful and thought through approach to glazing. We are learning and earning potters, learning the craft and acquiring some income from it as we grow, working with cone 6 clays and glazes. I've been visiting your site frequently recently because we are starting to mix our own glazes, and we wanted to be able to incorporate the textures, surfaces and colors of our choosing, not hit or miss due to trying untold numbers of blind recipes. I've found that even a glaze that I've seen on someone else's work, using the same glaze mix on my work, does not guarantee the same result in my kiln, due to clay differences, surely, but also how my kiln fires, what temps it reaches, what timing, etc. So we want be able to work out glazes that look and feel the way that we like, in our firing environment, on our clays.
  • Your web is great!
  • When my group of potters are pressed to improve our glazes they say if the old way is not broken yet why don't you buy yourself some kind of a kit to play with new glazes and then we can make it for everyone. You got to be kidding I say to myself. Anyway, your website will help me help the group out of some old and boring glazes if I can see forward enough. Thanks for all this important info, I can't believe this website is here!
  • Great site btw. Besides getting married its the next best thing I did.

What people have said about Insight-Live

  • You have such a brilliant analytical mind, able to find solutions to many ceramic problems. You have accomplished so much in your life, helping us potters understand what we are doing. I cannot thank you enough for your vast ceramic reference library online. I think you are a national treasure.
  • Your site is the most useful of them all for material info. and more. Thank you.
  • Digitalfire is just jaw-droppingly awesome. Thanks for all your hard work.
  • It's very impressive work you do. Thanks you for providing it.
  • First i'd love to thank you for all the info you provide on digitalfire. it is an absolutely amazing resource and the way that you explain glaze chemistry/reactions has really helped expand my practice...I crave understanding and wisdom.
  • Great software!
  • A big thank you for sharing your vast knowledge through this site. I have spent many an hour scouring your articles and learning. Your depth of understanding of so many different aspects of ceramics often exceeds what is available in many books., All Rights Reserved
Privacy Policy